Specification Sheet

179
www.lutron.com | 1.800.523.9466 |
Tu-Wire® Fluorescent
Ballasts (120 V)
Switched Lighting
(120/277 V)
PA SW
Phase Adaptive
Power Module*
Switching
Power Module*
PHPM-PA-DV-WH PHPM-SW-DV-WH
Dimmer
Family
Single-
pole
3-way or
multi-location
Single-
pole
3-way or
multi-location
Abella
® – – – AB-S6AM-
Ariadni
® – AYF-103P- – –
Ceana
® – – – –
Diva
®
Gloss
– DVF-103P- – –
Diva
Satin Colors
®
– DVSCF-103P- – –
Glyder
® – – – –
Lyneo
® Lx – LXF-103PL- LX-1PSL- LX-3PSL-
Maestro
®
Gloss
– MAF-6AM- – MA-S8AM-
Maestro
®
Satin Colors
®
– MSCF-6AM- – MSC-S8AM-
Maestro
Wireless
®
–
MRF2-
F6AN-DV-
– MRF2-6ANS-
Nova
® NF-10- NF-103P- – –
Nova Tb
®
NTF-10- NTF-103P- – –
Skylark
® SF-10P- SF-103P- – –
Spacer
System
®
SPSF-
S6A-
SPSF-6AM-
SPSF-
S6A-
SPSF-S6AM-
Vareo
® – VF-10- – VETN-1000-
Vierti
® contact Lutron contact Lutron
Dimmer models/load interface compatibility
Appendix | Lighting load interfaces
Technical notes
• Lighting load interfaces
must be matched to
load type and voltage
• All load interfaces
for dimmed load
are controlled by
a 120 V 3-wire
fluorescent dimmer
• Power feed to dimmer
may differ from lighting
load/interface voltage
• Interfaces typically require
additional power feeds
• For wiring information,
consult wiring diagrams,
see pgs. 193-195
• For assistance and
additional solutions,
consult Lutron
Technical Support
at 1.800.523.9466
(24 hours/7 days)
Interface mounting
• PHPM interfaces mount
to 2-gang electrical
backbox (W: 6.30 in x
H: 5.10 in)
• GRX-TVI enclosure is
surface mount only (W:
6.10 in x H: 12.50 in x
D: 3.30 in)
Use only dimmer model numbers listed.
* Dual 120/277 V model given,120 V only versions are also available.
Please see Technical notes, pg. 179.