Quick Start Guide

Note: Returning an outdoor plug to its factory settings will remove
it from the Caséta system and unpair it from a Pico remote control.
Note: Unplug all loads from the outdoor plug prior to returning to
factory settings.
1: Triple tap the On/Off button on the outdoor plug.
DO NOT release the button after the third tap.
2: Keep the On/Off button pressed for approximately 3 seconds
until the button flashes quickly.
3: Release the On/Off button and immediately triple tap it again.
This time release the button after the third tap. The button will
flash slowly.
The outdoor plug has now been returned to its factory settings
and can be reprogrammed into a system or paired with a
Pico remote control.
The Lutron logo, Lutron, Caséta, and Pico are trademarks or registered trademarks of
Lutron Electronics Co., Inc. in the US and/or other countries.
Apple is a trademark of Apple Inc., registered in the U.S. and other countries. AppStore is a
service mark of Apple Inc.
All other product names, logos, and brands are property of their respective owners.
© 2020 Lutron Electronics Co., Inc.
Using your Caséta Wireless outdoor plug
1
Press and hold “On / Off” button on outdoor plug
Pairing the outdoor plug and
Pico remote control
(sold separately)
2
Press and hold “off” button on Pico remote
x3
Hold for 6 seconds until the
button starts blinking.
Hold for 6 seconds until lights
flash 3 times.
Repeat steps to pair additional Pico remote controls.
The Lutron app will walk you through setting up your devices
www.casetawireless.com/LutronApp
With a smartphone or tablet (Bridge required, sold separately)
Lutron
The Caséta Wireless outdoor plug can be controlled from a smartphone when used with the Lutron Smart Bridge.
If you are using the outdoor plug with the Lutron Smart Bridge follow the instructions below.
Search for “Lutron Caseta”
Lutron
Lutron Smart Bridge
Note: If you are using the outdoor plug with another manufacturer’s
bridge, please refer to that manufacturer’s instructions for set-up.
Lutron
Lutron App
Add devices
• Pico remotes
• Dimmers
• Shades
Schedule
your lights
Connect
while away
Without a smartphone or tablet
(Bridge not required)
3
Use the Lutron app to complete ALL remaining steps
2
Launch the Lutron app
1
Download the Lutron app
Resetting the outdoor plug to its
factory settings
0
5
10
15
0
5
10
15
6 sec
6 sec