Lamp TUNABLE WIRELESS LAMPS Installation Guide Models S30 PAR 30 Lamp S38 PAR 38 Lamp A20 Lamp
! Warning Shock Hazard. May result in serious injury or death. Turn power OFF at circuit breaker or remove fuse. Damage to this product caused by wiring with power on voids the warranty. Due to the risk of electric shock, a licensed electrician should install this power supply unit in strict compliance with the National Electrical Code and any state or local code which may apply. FCC/ IC Information: This device complies with part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s).
Contents Product Overview 4 Dimension Drawings 5 Installation 6 Fixture Placement 6 Power 6 After Installation Warranty & Tech Support 3 | LAMP INSTALLATION GUIDE 7 8 770-0000XX-01 r11 © 2019 Ketra, Inc.
Product Overview Ketra’s Family of lamps are an all-encompassing LED solution with the ability to render 90+ CRI white light, saturated colors and pastels from a fully mixed, single point source. Ketra’s custom driver chip and optics incorporate closed-loop thermal and optical feedback, maintaining a factory-calibrated color point to one MacAdam ellipse over the product’s lifetime. Each lamp is wirelessly controlled and individually addressable through Ketra’s accompanying software.
Dimension Drawings 4.80 in, 122 mm 4.95 in, 126 mm 2.52 in, 64 mm E 26 Base S38 PAR 38 Longneck Lamp fig. 1 4.95 in, 126 mm 3.7 in, 95 mm E 26 Base A20 Lamp fig. 2 4.7 in, 118.6 mm 2.4 in, 60.1 mm 1 in, 25.4 mm 1.8 in, 44.7 mm E 26 Base S30 PAR 30 Longneck Lamp fig. 3 5 | LAMP INSTALLATION GUIDE 770-0000XX-01 r11 © 2019 Ketra, Inc.
Installation Fixture Placement For ideal KetraNet Mesh wireless performance, position the Lamp according to these guidelines: • Keep within range: Place the Lamp within 50 ft (15.24 m) of at least one or more KetraNet Mesh enabled device in its network. • Avoid obstructions: Avoid having metal obstructions or walls between the Lamp and the nearest device. • Avoid metal enclosures. • Separate from Wi-Fi devices: Maintain at least 6 ft (1.
I N S TA L L AT I O N After Installation Ketra lamps power on to a warm white color. They are not controllable until being commissioned in Ketra’s Design Studio software. Commissioning requires at least one Ketra N4 Hub connected to a DHCP-enabled router. For manuals and installation guides, see the Design Studio product page and the N4 Hub product page on our website. Design Studio product page N4 Hub product page 7 | LAMP INSTALLATION GUIDE 770-0000XX-01 r11 © 2019 Ketra, Inc.
Warranty & Tech Support Limited warranty terms can be found at: www.ketra.com/warranty For questions and technical support please contact: (844) 588-6445 ketrasupport@lutron.com Ketra and KetraNET are trademarks or registered trademarks of Lutron Ketra LLC, in the US and/ or other countries. 8 | LAMP INSTALLATION GUIDE 770-0000XX-01 r11 © 2019 Ketra, Inc.
| LAMP INSTALLATION GUIDE 770-0000XX-01 r11 © 2019 Ketra, Inc.
6231 E. Stassney Ln. Bldg. 13, Suite 400 Austin, TX 78744 770-0000XX-0X r11 ketra.com 512.872.
