User's Manual

RadioRA ® Setup Guide for the Entry Master Control
16
Section 3 - Start-Up
AWAY
NIGHT
HOME
MORNING
WELCOME
ALL ON ALL OFF
SECURITY
FLASH
FULL
CCO 2
CCO 1
LEARN
GARAGE 1
GARAGE 2
SUNRISE
SUNSET
AWAY
NIGHT
HOME
MORNING
WELCOME
ALL ON ALL OFF
SECURITY
FLASH
FULL
CCO 2
CCO 1
LEARN
GARAGE 1
GARAGE 2
SUNRISE
SUNSET
AWAY
NIGHT
HOME
MORNING
WELCOME
ALL ON ALL OFF
SECURITY
FLASH
FULL
CCO 2
CCO 1
LEARN
GARAGE 1
GARAGE 2
SUNRISE
SUNSET
AWAY
NIGHT
HOME
MORNING
WELCOME
ALL ON ALL OFF
SECURITY
FLASH
FULL
CCO 2
CCO 1
LEARN
GARAGE 1
GARAGE 2
SUNRISE
SUNSET
Step 3 Select an Entry Master Control
Button
Press and release Entry Master Control button
that you want to learn a Visor Control button;
its LED will turn ON.
LED turns ON.
Entry Master Control Learning a Visor Control
Step 1 Plan which Entry Master
Control buttons you want to
learn Visor Control buttons
Button Programming
Step 2 Enter LEARN Mode
Press and hold the LEARN button on the Entry
Master Control until the green LEARN LED
turns ON (approximately 3 seconds).
The green LEARN LED turns ON.
AWAY
NIGHT
HOME
MORNING
WELCOME
ALL ON ALL OFF
SECURITY
FLASH
FULL
CCO 2
CCO 1
LEARN
GARAGE 1
GARAGE 2
SUNRISE
SUNSET
HOME AWAY GARAGE 1
• If the ALL ON button is selected, LEDs in
the right most column will cycle upward.
• If the ALL OFF button is selected, LEDs in
the right most column will cycle downward.
• If either FULL or FLASH is selected, both
the FULL and FLASH LEDs will turn ON.