User's Manual

Sivoia QEDTM
|
Wireless Roller 64 for HomeWorks
Installation Instructions
SIVOIA QED
TM
Wireless Roller 64 Installation Instructions
1
Tools Required:
Tape Measure 1/4” Hex-Head Driver
Wire Cutter/Stripper Level
Pliers Power Drill
#2 Phillips Screwdriver
Sivoia QED
™
Wireless Roller 64
Standard Mounting Brackets
with Retaining Screws
(5) Mounting Screws
(#8x1-3/4" (#8x44mm) Hex Head Screws)
(1) 3 Pin Terminal Block
(Actual Size)
(1) Programming Stylus (1) Screwdriver
(2) 4” (102mm) Cable Ties
Notes:
1) For Wireless Roller 64 programming refer to the HomeWorks® Illumination Online Help.
2) The Electronic Drive Unit (EDU) will need to be powered to complete installation.
Wireless Shades will not function until they are addressed and programmed using the
HomeWorks
® Illumination Software.
Box Contents:
(2) Bracket Leveling Spacer (2) Cable Tie Anchor
(2) Antenna
Mounting Clips