User's Manual

9
*
1
2
*
1
2
3
4
Home C: 10000 sq. ft. (928m
2
) or greater - or multiple structures/buildings
Inter-Processor Link
1000 ft. (305m) maximum wire run distance
Hybrid Repeater Link
1000 ft. (305 m) maximum wire run distance
RF Processor 1: Main
House
RF Processor 2:
Guest House
RF Processor
RF Processor
RF Signal
Repeater
RF Signal
Repeater
System Communication Notes
• RF Dimmers and Keypads must be located within 30 ft. (9m) of an RF Signal Repeater or an RF Processor.
• RF Signal Repeater must be located within 60 ft. (18m) of an RF Processor or another RF Signal Repeater.
• Multiple processors or repeaters may be necessary to provide adequate coverage. Up to 16 processors (with up to 4
repeaters each) may be connected together in a system.
• RF Dimmers cannot be controlled by the system and RF Keypads do not function until they are addressed and
programmed. See the HomeWorks
® IlluminationTM
Software online help.
Hybrid Repeater Link
RF Coverage Diagrams - Continued
30 ft. (9m)
maximum
60 ft. (18m) maximum
between RF Processors and
Repeaters, or between
Repeaters
RF Processor RF Keypad
60 ft. (18 m)
maximum
30 ft. (9 m)
maximum
60 ft. (18 m)
maximum
Hybrid Repeater