User's Manual

6
RadioTouch Tabletop Transmitter Addendum
Hardware Installation
RadioTouch
Open
Stop
Close
Tabletop Button Functions
Setup for AC Motorized Window
Treatments (RTA-RX-F-SC only)
Make sure that the RadioTouch Controller is properly
wired. Refer to the RadioTouch Installer’s Guide (P/N
030-200) for detailed wiring information.
Step A - On the RadioTouch Controller, flip SHADE
SETTINGS DIP SWITCH #1 UP for open, close, and
stop functionality.
Step B - Make sure appropriate transmitters are added
to the Controller. See page 2 for Addressing Tabletop
Transmitters to Controllers.
Three button Switch Closure
Up
Down
Tabletop Button Functions
Setup for AC Motorized Projection
Screens (RTA-RX-F-SC only)
Make sure that the RadioTouch Controller is properly
wired. Refer to the RadioTouch Installer’s Guide (P/N
030-200) for detailed wiring information.
Step A - On the RadioTouch Controller, flip SHADE
SETTINGS DIP SWITCH #1 DOWN for up and down
functionality.
Step B - Make sure appropriate transmitters are added
to the Controller. See page 2 for Addressing Tabletop
Transmitters to Controllers.
Two button Switch Closure