User's Manual

ManualsBrandsLutron Electronics ManualsElectronicsH-RFP-1P Central Processing Unit

PRELIMINARY

SPECIFICATION SUBMITTAL

MODEL NUMBERS:JOB NAME:

JOB NUMBER:

Page

PROCESSORS RF Processor

048-020 1a 11.05.02

HomeWorks InteractiveTM

HomeWorks

RF Processors

RF Processor

DESCRIPTION

HomeWorks RF Processors comprise the major communication hub

of a HomeWorks RF system. Each RF Processor will support up to 32

RF Keypads and up to 64 RF Dimmers. RF system devices communi-

cate with the RF Processor via Radio Frequency.

Up to 4 RF Signal Repeaters may be used with each processor to

extend the range of the RF Processor.

A maximum of 16 RF processors may be connected together in a

system to support a total of 1024 RF dimmers/switches and 512

RF keypads.

MODEL NUMBERS

RF Processors

H-RFP-1P RF Processor with 1 RS232 Port

H-RFP-2P RF Processor with 2 RS232 Ports

Summary of content (5 pages)

PAGE 1
P R E L I M I N A R Y PROCESSORS HomeWorks Interactive TM RF Processor 048-020 1a 11.05.02 HomeWorks® RF Processors DESCRIPTION HomeWorks RF Processors comprise the major communication hub of a HomeWorks RF system. Each RF Processor will support up to 32 RF Keypads and up to 64 RF Dimmers. RF system devices communicate with the RF Processor via Radio Frequency. Up to 4 RF Signal Repeaters may be used with each processor to extend the range of the RF Processor.
PAGE 2
P R E HomeWorks InteractiveTM L I M I N A R Y PROCESSORS RF Processor 048-020 2a 11.05.02 S P E C I F I C AT I O N S Regulatory Approvals • Battery backup will maintain programming for up to 10 years under normal use. • UL Listed (DC Adapter). • Built in astronomical time clock. • Complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. • Programming is done via RS-232 connection using existing HomeWorks Interactive software.
PAGE 3
P R E HomeWorks InteractiveTM L I M I N A R Y PROCESSORS RF Processor 048-020 3a 11.05.02 DIMENSIONS Side View Front View (port cover removed) 6.7" (170mm) 1.77" (45mm) 8" (203mm) 0.70" (18mm) 6.16" (157mm) 5.77" (147mm) 11.54" (293mm) 1.
PAGE 4
P R E HomeWorks InteractiveTM L I M I N A R Y PROCESSORS RF Processor 048-020 4a 11.05.02 INTER-PROCESSOR WIRING Wired Processor RF Processor RF Processor # * # * OK OK 88 TX 1 2 3 4 TX RX BUS 1 1 2 3 4 G1 V1 G2 V2 RX BUS 2 1 2 3 4 TX TX RX BUS 3 1 2 3 4 G3 V3 G4 V4 3 4 3 4 1 2 LT-1 Link Terminator Pin 1 - 1 No. 18 AWG (1.0mm2) Pins 3 & 4 - 1 pair No. 22-18 AWG (0.5 - 1.
PAGE 5
P R E L HomeWorks InteractiveTM I M I N A R Y PROCESSORS RF Processor 048-020 5a 11.05.02 Home A: 2500 sq. ft. (232m ) or less - all RF devices within 30' (9m) of RF Processor 2 SY S T E M C O M M U N I C AT I O N N OT E S • RF Dimmers and Keypads must be located within 30 feet (9.14m) of an RF Signal Repeater or an RF Processor. Multiple repeaters may be necessary to provide adequate coverage.