User's Manual

Preliminary RadioRA Car Visor Instructions 09/19/01
Page 8 of 10
Step 3 Learn the Transmitter
Button to the Receiver
Press and hold the Transmitter button
(approximately 3 seconds) until the LED of
the selected Receiver button flashes for 3
seconds. If the transmitter is learned to the
ALL ON button, the LEDs in the right most
column will rapidly flash upward for 3
seconds. If the transmitter is learned to the
ALL OFF button, the LEDs in the right most
column will rapidly flash downward for 3
seconds.
The Transmitter button may be learned to
any one of the ROOM/SCENE, ALL ON,
ALL OFF, Input, Output, or both FULL ON
and FLASH buttons.
The learned receiver button flashes for 3
seconds before turning off.
The receiver button turns off indicating that
the transmitter button has been learned to
the receiver button.
To verify that the Transmitter Button has
been learned to the Receiver Button, press
the Transmitter button again. The
corresponding Receiver button LED will
begin to flutter indicating that the Transmitter
button is learned to the Receiver button.
To unlearn a Transmitter button, repeat
Steps 2 and 3 for the desired button(s).
Step 4 Select and learn the next
Transmitter Button to the Receiver
Button
Repeat Steps 2 and 3 for any remaining
Transmitter buttons to be learned to
Receiver Buttons. Proceed to Step 5 when
all Transmitter buttons have been learned.
Step 5 Select the next
Transmitter
Repeat Steps 2-4 for any remaining
Transmitters. Proceed to Step 6 when all
Transmitters have been activated.