User's Manual

Preliminary RadioRA Car Visor Instructions 09/19/01
Page 7 of 10
Programming a Car Visor Transmitter
The Car Visor Control can learn a maximum of 7 Car Visor Transmitters.
Step 1 Begin Learning a
Transmitter to the Receiver
Press and hold the LEARN button
(approximately 3 seconds) on the Car Visor
Receiver until the LED turns on.
Step 2 Select the Receiver
Button to be learned to the
Transmitter Button
Press and hold the Receiver button
(approximately 3 seconds) that the
Transmitter button will be learned to until the
corresponding LED turns on. If the ALL ON
button is pressed, the right most column of
LEDs will flash upward. If the ALL OFF
button is pressed, the right most column of
LEDs will flash downward.