User's Manual

Preliminary RadioRA Car Visor Instructions 09/19/01
Page 4 of 10
Assigning Dimmers, Switches, or GRAFIK Eye
Control Units to Car Visor Control Buttons
Step 1 Begin assigning
Dimmers, Switches, or GRAFIK
Eye® Control Units to buttons
Simultaneously press and hold the 2nd and
4th buttons in the right most column until the
upper right LED begins to flash
(approximately 3 seconds).
Upper right LED flashes.
Step 2 Select a Button
Press the button that you want to program.
Its LED will begin to flash.
Valid Car Visor buttons that can to be
programmed are the right most column
buttons, ALL ON, ALL OFF, Inputs, or
Security FULL and FLASH buttons.