User's Manual

Preliminary RadioRA Car Visor Instructions 09/19/01
Page 3 of 10
Step 3 Changing the closure
type for the Input buttons
(continued)
If a CCI is set as Momentary (default
setting), its LED will be OFF. If a CCI is set
as Maintained, its LEDs will be ON.
To change the setting to Maintained, press
and hold the CCI button until the LED turns
ON.
To change the setting to Momentary, press
and hold the CCI button until the LED turns
off.
Step 4 Complete ROOM/SCENE
Assignment
Simultaneously press and hold the 3rd, 5th,
and ALL OFF buttons in the right most
column until the LEDs stop flashing
(approximately 3 seconds).
Step 5 Label columns
Apply the supplied ROOMS or SCENES
labels to the space provided over the right
most button column.