User Manual
To charge the baery of the helicopter:
1. Turn the switch on the helicopter “ON”
2. Connect the baery charger.
1. Make sure the charger is connected to the outlet.
2. The baery can be damaged by overheang or over charging, please disconnect if the charger
is overheang.
3. The charger has an advanced and specific funconing system. For safety do not use other
chargers.
4. Recharge the baery of the helicopter aer 30 minutes of last flight. The baery becomes
hot aer flying, charging immediately aer usage may cause damage it.
5. For safety do not place the baery near heat sources that may cause short circuit.
6. for security prevent contact of the baery terminals with metal parts as it could cause
a short circuit
1) Fly under the best weather condions.
1. Never fly under extreme temperatures:
a. Do not fly if over 113 °F/45 °C or under 50 °F/10 °C. Flying under extreme
temperatures can impede performance and damage the product.
2. Do not fly in strong windy condions as wind will impede control of the helicopter. The wind
may cause loss of control, damage the product and may cause injury.
2) Choose an open area to fly the helicopter. Make sure there are no obstrucons, animals or
objects close to the flying area.
5. Charging the Baery (Helicopter)
6. Flight Environment and Locaon
Cauon:
Over 2.5 meters
Over 3 meters
Over 3 meters
Over 3 meters
Over 2 meters
While the helicopter is charging, make sure that the switch is in the ON posion