Installation Guide

1
CAUTION: Turn the power off at the main circuit breaker or
fuse box. Never rely on the wall switch alone to turn off power.
Remove the 2 acorn nuts (CC1) from the
crossbar (CC). Attach the crossbar (CC) to
the junction box using the screws (AA).
5
ASSEMBLY INSTRUCTIONS
AA
Hardware used
AA
Screw x2
A
1
Wire connection guide:
Ground wire:
Wrap ground wire from outlet box around ground
screw preassembled on crossbar (CC) no less
than 2 in. from wire end. Tighten ground screw.
If fixture is supplied with a ground wire, connect
to outlet ground wire with a wire nut.
Supply wires:
Connect the Neutral (White) supply wire from the
outlet box to the Neutral fixture wire (White).
Connect the Hot (Black) supply wire from the
outlet box to the Hot fixture wire (Black).
Tighten by wire nut (BB)
2
Hardware used
BB
Wire nut x2
2
CC
CC
Crossbar x1
BB
CC1
CC
WARNING: Consult a qualified electrician if you are n o t
certain about the installation process. Always install wiring
connections in accordance with local code, ordinances a nd
the National
E l ec tric Code.
WARNING: Changes or modifications to this unit not
expressly approved by the party responsible for c o mplianc e
could void the user’s authority to operate the equipment.