Operation Manual

LBNZ 500 A1

│

NI

│

13 ■

♦ Clean the mixer unit after you have removed it as described in section

Removal/ﬁtting the mixer unit with washing-up liquid and then rinse

it in clear running water.

♦ Ensure that there is no detergent residue on or in the appliance before using

it again.

♦

The container , lid

steamer insert

and steamer grill are

dishwasher safe.

Removal/ﬁtting the mixer unit

In order to clean the mixer unit , you must re-

move it from the container as described above.

♦ Pull the container

up, grip the blade drive

(B) turn it clockwise – as viewed from below –

until the mixer unit

comes free.

♦ Put your hand into the container

and

carefully remove the mixer unit from the

container .

WARNING – RISK OF INJURY!

► The blades in the mixer unit

are very sharp! To avoid cutting injuries, do

not touch the blades with your bare hands.

♦ After cleaning, replace the mixer unit

from above (as shown) into the container

and guide the blade drive (B) through the

opening in the bottom of the container.

♦ Turn over the container

, grip the blade

drive (B) from below and turn it anticlockwise

– as viewed from below – as far as the stop.