Owners manual

Body Panel

Sealant

Fender Flare

Page 3 of 3

Care and Cleaning

• Lund fender flares are built to last; any detergent you use to wash your vehicle is sufficient to clean the flares. Do not use any

harsh abrasive detergents.

NOTE: Actual application may vary slightly from illustrations.

Installation Steps

U-Clip Installation

Lever Clip Installation Rivet Style Only

Due to building variations in trucks,

it may be necessary to remove

some sealant from inner lip of

fender to allow installation on U-

Clips.

Press fender flare edge so that

it is flush with fender edge.

fender edge

fender flare

Press U-clip in place so that

it encompasses both edge of

fender flare and edge of fender.

For Rivet Style Only

Lever Clip with Existing Screw

TIP

FENDER FLARE

BODY PANEL

Congratulations!

You have purchased one of the many quality Lund

branded products offered by Lund International. We take the utmost pride in our

products and want you to enjoy years of satisfaction from your investment. We have made every effort to ensure that your product is

top quality in terms of fit, durability, finish and ease of installation.

PLEASE READ: dirt and debris can become lodged between the fender flares and the vehicle’s fenders, causing scratching and paint

wear from vibration. Lund International is not responsible for any damage, and the installation of our fender flares is done with the

buyer’s understanding that this scratching and paint wear may occur.

Lund

and the Lund

are trademarks of Lund, Inc.

Lund International

800-241-7219 • Visit us at lundinternational.com

™