Manualshelf

Installation Instructions

ManualsBrandsLund ManualsAutomotiveGenesis Roll Up Tonneau 2004-2007 Chevrolet/GMC Silverado/Sierra 5.5' Box
123456
Installation Steps
PAGE 5 of 6
12
1703118
Rev.2
B C
A
Engage rear rail to latch assembly and rotate down as shown.
If
the cover is too tight, loosen the adjusting bolts evenly on both sides towards the
-
If the cover is too loose, tighten the adjusting bolts evenly on both sides towards the
+
Note: Proper cover tension is achieved when the rear rail requires moderate pressure to
fully
latch.
A
Release the buckles and unroll the cover.
11
B
C
A
Release Cable
To access the truck bed, pull both release cables and roll cover forward.
Fasten
buckle straps to stow cover.
g
n
i
v