Owners manual

PAGE 15 of 20
Inspection After Installation
Care and Cleaning
Congratulations!
PAGE 6 of 20
1. After installation is complete, confirm proper operation.
1. Wash only with mild soap & dry with a clean cloth.
2. Avoid the use of automatic “brush - style” car washes.
3. Do not use cleaning solvents of any kind.
4. Periodically check the cover tension and all components for tightness.
Refer to step 12 for cover tension adjustment.
5. Do not use release cables as handles.
6. Do not pull on release cables to enter truck bed.
7. Do not use any part of this tonneau as a tie down.
8. Do not drive with the cover un-secured.
You have purchased one of the many quality products offered by Lund. We take the utmost pride in
our products and want you to enjoy years of satisfaction from your investment.
We have made every effort to ensure that your product is top quality in terms of fit, durability, finish
and ease of installation.
Lund International, Lund Accessories Division
300 Horizon Drive
Suwanee, GA 30024
800-328-5863 • Fax [phone] • Visit us at lundinternational.com
© 2004 Lund International, Inc. All rights reserved.
Lund ® and the Lund ® logo are trademarks of Lund International, Inc.
1703138
Rev.1
7
5
F
Placez chaque bride intérieure comme montré et serrez les deux boulons sur chaque bride à 50-60 in.lbs. Les brides
devraient s'engager comme montré.
REMARQUE: Répétez les étapes 1-5 pour le rail latéral de passager.
A
D
A
A
B
6
1703138
Rev.1
Glisser un boulon de carrossier d'environ 13 mm dans la fente en
T de chacune des extrémités du rail avant, comme illustré.
Mettre la couverture en place, comme illustré.
Étapes d'installation