OWNER’S MANUAL
Congratulations! You are now the proud owner of a BOOMCHAIR™. Prepare to experience your entertainment on a whole new level. BOOMCHAIR™ allows you to HEAR the sound and FEEL the excitement. You’ll experience every crash, bang, and boom while enjoying your favorite game, music, or movie. BOOMCHAIR™ is also a great game seat built to endure the rigors of today’s gaming environment. Take a moment to review your owner’s manual before connecting your BOOMCHAIR™.
SET-UP GUIDE The BOOMCHAIR™ comes with the following: PARTS LIST: 1) BOOMCHAIR™ 2) POWER SUPPLY (UL Listed) 3a) RCA TO MINI AUDIO CORD (headphone jack to audio left & right channel connectors) 1 3b) RCA CORD (audio left & right channel connectors) 3c) RCA AUDIO COUPLER 3a 6 4) POWER RECEPTACLE 3b 5 5) HOOK & LOOP FASTENER 7 7) ADJUSTABLE RECLINE STOPPERS 6) MESH POCKETS 8) DASHBOARD CONTROL PANEL 4 9) SPEAKERS 9 2 SYSTEM SPECS: 3c Dimensions: 24 in. L x 16 in. W x 26 in. H 61 cm.
ASSEMBLY INSTRUCTIONS Step 1: Lift seatback to the upright position. STEP 1 Step 2: Secure the seat back using attached hook & loop fasteners. Step 3: Insert receptacle (4) into adapter cord (2). Step 4: Plug adapter (2) into outlet. Step 5: Turn Boomchair™ on by turning Power knob (A) clockwise. 4 STEP 3 BATTERY POWER SUPPLY 2 Step 1: Unscrew battery compartment on bottom of Boomchair™. Step 2: Insert 4 “AA” cell batteries (not included). Step 3: Close battery compartment securely with screws.
CONNECTING TO PORTABLE AUDIO / VIDEO DEVICES Step 1: Connect the Red/White ends of RCA cord (3a) into RCA INPUT (C) of BoomChair™. Step 2: Plug the single end of the RCA cord (3a) into the headphone jack of your device. Step 3: Turn Boomchair™ on by turning Power knob (A) clockwise. Step 4: Turn portable device on.
DAISY CHAINING CHAIRS TOGETHER Note: You will need two RCA “Y” adapters (sold separately) and two RCA cords (3b) to connect two BoomChairs™ Step 1: Connect single end of first “Y” adapter to RED RCA plug coming from media device. (Fig.1) Step 2: Connect single end of second “Y” adapter to WHITE RCA plug coming from media device. (Fig.2) Step 3: Cord A (Fig.3): Connect RED plug to RED “Y” adapter and WHITE plug to WHITE “Y” adapter. Separate cords as necessary.
TROUBLESHOOTING BOOMCHAIR™ Q: Why isn’t there sound coming from any of my speakers? A: Ensure your BoomChair™ is connected as described in the Setup Guide. Check that the power to the unit is on and the volume is turned up. Also, make sure your audio device is not set to “MUTE” and volume is turned up. Q: Why isn’t there sound coming from one of my speakers? A: Ensure the audio cord to the BoomChair™ is securely connected as described in the Setup Guide.
LUMISOURCE, INC. LIMITED WARRANTY LIMITED WARRANTY: LumiSource, Inc. (“LumiSource”) warrants this product against defects in materials and workmanship for a period of ninety (90) days from the date of original consumer purchase.
