User Guide

Body Fat Manager
Model 1251
Instructions for Use
Warning & Notes
This device should not be used by pregnant women or patients with
pacemakers or other implanted medical devices.
This device calculates body fat percentage and body mass index for
health managment and personal reference only. Should you have any
other questions regarding your health, do not hesitate to contact your
physician.
Introduction
Your Lumiscope Body Fat Manager accurately calculates Body Fat
Percentage and Body Mass Index (BMI). This data can be used to more
effectively manage your health, providing information such as caloric
needs, weight loss or gain and exercise recommendations.
Parts Description:
Power Button - Turns on the unit.
UP Button - Increases settings values. While in ‘Exercise’
mode will display amount of time the device has been in use.
DOWN Button - Decreases settings values. While in exercise
mode will switch device to ‘Information’ mode.
Set Button - Confirms entered values. While in exercise mode
will allow user to re-enter body weight or enter ‘Information’ mode.
Go Button - Starts body fat measurement.
Measuring Terminals - Areas where thumbs are to be placed
during measurment
LCD Display:
Measuring Terminals
Power Button
Go Button
UP Button
Set Button
DOWN Button
Icon Explanation
PLAN Exercise plan
DAYS Days on Exercise Plan
OUT Suggested Daily
Calories Burned
IN Suggested Daily
Calorie Intake
Male
Female
MI/KM Suggested Walking
Distance in Miles/km
KCAL 1000 Calories
Icon Explanation
LB/KG Weight in
pounds/kilograms
Waiting for Thumb
Placement
Body Mass Index
Body Fat Percentage
Body Type
ERR.1 Measurement Out
of Range
ERR.2 Thumbs Not Placed
Properly on Pads
ERR.3 Testing Signal Error
Taking Measurements with your Body Fat Manager:
To change between metric and imperial units: after turning the device
on while the display is showing all symbols (for approx. 4 seconds),
press and hold both the UP and DOWN buttons.
To enter ‘SET’ mode, after turning the unit on and while the display is
showing all symbols (for approx. 4 seconds), press and hold the ‘Set’
and ‘UP’ buttons together until the LCD screen displays the word
‘SET’. You will then enter ‘SET’ mode, and input your personal data,
as follows:
1. Age is the first number to appear. Use the ‘UP’ and ‘DOWN’
buttons to set your age in years and press ‘Set’ to confirm. Gender
selection is next.
2. Use the ‘UP’ and ‘DOWN’ buttons to select male or female and
press ‘Set’ to confirm. Weight setting is next.
3. Use the ‘UP’ and ‘DOWN’ buttons to set your body weight and
press ‘Set’ to confirm. Height setting is next.
4. Use the ‘UP’ and ‘DOWN’ buttons to set your height and press
‘Set’ to confirm. Weight loss program selection is next.
5.Use the ‘UP’ and ‘DOWN’ buttons to set the number of days for
your weight loss program (30, 60 or 90) and press ‘Set’ to confirm.
You are now ready to take a reading!