Installation Guide

6
Installation (continued)
3
Making the electrical connections
□ Wrap the ground wire from the light fixture around the
ground screw (FF) on the mounting bracket (AA), and
then use a wire connector (DD) to connect the ground
wire from the light fixture to the ground wire from the
outlet box.
□ Use a wire connector (DD) to connect the white wire
from the light fixture to the white wire (neutral wire)
from the outlet box.
□ Use a wire connector (DD) to connect the black wire
from the light fixture to the black wire (live wire) from
the outlet box.
□ Wrap the three wire connections with electrical tape for
a more secure connection.
□ Position the wires back inside the outlet box.
4
Securing the fixture to the wall
5
Installing the light bulb
□ Align the nipple (CC) to protrude through the hole on
the fixture (A).
□ Secure the fixture (A) to the wall by screwing the cap nut
(GG) onto the nipple (CC).
□ Install a 60-Watt maximum, candelabra base
bulb (sold separately) into the fixture (A).
NOTE: You can use a candelabra base CFL equivalent
energy-saving bulb that does not exceed 13 Watts (sold
separately).
NOTE: You can use a candelabra base LED equivalent
energy-saving bulb that does not exceed 8.5 Watts (sold
separately).