Installation Instructions

99-9049-000
99-9049-000
4 5
8. Attach front lip of headrail into the front
hook of each mounting bracket.
• TIP: Be sure headrail is hooked onto all
brackets before proceeding to step 8. Do
not install blind one bracket at a time.
9. Rotate and push headrail back into the
mounting brackets until the back of the
headrail clicks into place.
• TIP: More force may need to be applied
in order to get blind to click into
brackets. Two people may be required,
depending on the width of your blind.
10. Insert the hook at the top of the wand
through the hole protruding from the front left
side of the headrail.
OPTIONAL: Hold down bracket installation
Use only if you wish to secure the blind to the bottom of the window.
1. Screw the hold down brackets (one on each side)
to the bottom of the window or sill.
2. Insert the pins of the hold down brackets
into the holes on the sides of the bottomrail.
Click!
How to Correct an Uneven Bottomrail
1. Fully extend the blind.
2. Pull down hard on the highest side of
the bottomrail.
3. Push the bottomrail up to the headrail.
4. Fully extend the blind again.
5. Repeat steps until the bottomrail is level.
PULL
DOWN
PUSH
UP
PULL
DOWN
PULL