User Manual

1. Adjusting the Sample Probe Height

2. Revive After Storage Routine (Luminex)

3. System Initialization

All system startup routines are run from the MAGPIX Off-Plate Reagent Block. For

detailed instructions on how to perform these operations, refer to the Starting the

MAGPIX System for the First Time section of this manual.

FIGURE 6.

MAGPIX Off-Plate Reagent Block

1 Reservoirs

2 Strip Wells

MAGPIX New System Startup Errors

Problem Summary Resolution Notes

Calibration Failure

(2x) Clean with 70% isopropanol

or ethanol alcohol (reservoir B)

(2x) Alcohol Flush with 70%

isopropanol or ethanol alcohol

(reservoir B)

(3x) Rinse (reservoir D)

(3x) Prime

Run Calibration Routine Verify that reagent is freshly

vortexed. Use 6 drops of

reagent.

MAGPIX

User Quick Guide

For In Vitro Diagnostic Use