Owner's manual

• Plate Navigation - Displays a smaller plate image for the current batch. Click and drag in

the box to select wells to display.

• Off Plate Area - Designates an alternate location for maintenance commands in the

Commands and Routines list.

• Cancel - Returns to the main Protocols tab without saving.

• Back - Returns to the Analytes tab

• Save - Saves the protocol and returns to the main Protocols tab.

Standards and Controls (Stds/Ctrls) Details Subtab

Protocols > Protocols > Std/Ctrl Details

Click New Std/Ctrl on the Protocols tab of the Protocols page to open the Standards and

Controls (Stds/Ctrls) Details subtab.

Use this tab to create or edit a kit. The following fields are available:

Protocols Page