Manual

• Serial Number

• Firmware Version

• XYP Heater Temperature

• Sheath Pressure

• Calibration/Verification Status

• Last F3DCAL1 Calibration

• Last F3DeCAL1 Calibration

• Last F3DCAL2 Calibration

• Last F3DCAL3 Calibration

• Last F3DVER1 Verification

• Last F3DeVER1 Verification

• Last F3DVER2 Verification

• Last Fluidics Test

• Delta Calibration Temp

• System Temperature

• DD Temperature

• CL1 Temperature

• CL2 Temperature

• CL3 Temperature

• CL1 Voltage

• CL2 Voltage

• CL3 Voltage

• DD Voltage

• RP1 Voltage

• Number of Syringes

Items in this list relating to calibration and verification (CAL/VER) have one of the following

states:

• Passed - Indicates that the process completed successfully.

• Failed - Indicates that the process was not completed successfully. Failed items appear in

red.

• Not Current - Indicates that verifiers are not current. Verifiers are not current if you have

not calibrated the system since the last time you ran the verifiers.

• Not Yet Run - Indicates that this process has not yet been run on the machine.

Copy - Copies the system information to the Windows clipboard. You can then paste it into a

text editor such as Notepad.

Save - Opens the Save As dialog box to specify a file name and location to save the system

information file.

Introduction