Owner's manual

FIGURE 47.

Alert Options Tab

Alert Options - Offers three check boxes for each alert - Dialog, Email, and Sound. This

section displays the following events:

• Locked User - The user is locked out of the login.

• Batch Complete - The batch is finished.

• Warmup Complete - The laser is warmed up.

• Heater In Range - The plate heater is warmed to the designated range.

• Scheduled Maintenance - A scheduled maintenance routine is now due.

• Low Bead Count Detected - A bead count below the accepted range is encountered.

• Sheath Empty - A problem with the sheath fluid is encountered.

• Routine Complete - The currently running routine is complete.

• Delta Cal Temp Exceeded Tolerance During Batch - The delta cal temperature fell

outside the designated range during the running of the batch.

Select the appropriate check boxes to display a pop-up message, send an email, or play a

sound to alert you when the event occurs. All check boxes are selected by default. Cancel

and Save buttons display if you change a setting.

Speakers Attached/Speakers Not Attached - Enables sounds to be played through

speakers. Click this button if you have speakers attached to your system. The button title will

alternate between attached/not attached status when you click it.

Setup Email - Opens the Setup Email dialog box.

Touring the Software