Owner's manual

• Last CON2 Verification

• Delta Calibration Temp

• System Temperature

• DD Temperature

• CL1 Temperature

• CL2 Temperature

• CL1 Voltage

• CL2 Voltage

• DD Voltage

• RP1 Voltage

Items in this list relating to CAL/Verification, CON calibration, and controls have one of the

following states:

• Passed - Indicates that the process completed successfully.

• Failed - Indicates that the process was not completed successfully. Failed items appear in

red.

• Not Current - Indicates that verifiers are not current. Verifiers are not current if you have

calibrated the system since the last time you ran the controls.

• Not Yet Run - Indicates that this process has not yet been run on the machine.

Copy - Copies the system information to the Windows clipboard. You can then paste it into a

text editor such as Notepad.

Save - Opens the Save As dialog box to specify a file name and location to save the system

information file.

System Status Tab

Use this tab to view, print, and save system status log information. You can also access this

information by clicking the System Status button on the System Monitor.

xPONENT

3.1 Rev. 2