Owner's manual

Print All - Click to print the information for all the analytes in the report.

Save - Click to open the Save As dialog box. Select a location and click Save. This saves

only the analyte information currently being viewed.

Print - Click to print the analyte information currently being viewed.

New Report - Click to return to the main Reports window.

NOTE: If running a data interpretation of an allele call batch report, be aware

that when choosing analytes from the Select Analytes list, selecting

one analyte will select all analytes in that group.

Protocol Reports - A list of protocols displays. Choose from the following reports:

• Protocol Settings

• Plate Layout

• Protocol Audit

Select a protocol and then click Generate to generate the report.

Calibration and Verification Reports - Displays a list of calibrations and verifications.

Choose from the following selections:

• CAL1

• MagCAL1

• CAL2

• CON1

• MagCON1

• CON2

Select a calibration component, a date from the Date list, and click Generate to generate the

report.

Performance Verification Reports - Displays two report types. Choose either of the

following:

• Condensed

• Detailed

Select a report type, a date range from the Date list, and click Generate to generate the

report.

System Log Reports - Displays a list of system log reports. Choose from the following

selections:

• All

• Maintenance

• Security

• Warning and Errors

Select a system log report, a date from the Date list, and click Generate to generate the

report.

Advanced Reports - Enables a single option, User Report, in the list.

Click Generate to generate the report.

Touring the Software