Owner manual

Luminex IS Software Manual for Version 2.3- For In Vitro Diagnostic Use xMAP Technology
18
The Status Bar displays status information as the software processes
commands. Table 4 shows the typical messages that appear in the
status bar. Additionally, information displays as text on the
Diagnostics tab.
• Idling: waiting for a command
• Aspirating: drawing in sample
• Collecting Data: collecting data
• Sanitizing: sanitizing the instrument
• Washing: washing the sample line
• Priming: priming the instrument
• Calibrating: calibrating the instrument
• Canceling: canceling a command
• Backflushing: backflushing the instrument
• Draining: draining the instrument
• Warming Up: warming up the instrument
• Verifying: verifying calibration
• Soaking: soaking the probe
• Adjusting sample probe
• Self Diagnosing: performing self-diagnostic
routine
Laser Status Laser temperature and readiness status
Green Lasers warmed up
Yellow Warmup timer countdown in seconds from 1800
Red Lasers off
Total Events/
Second
Number of total bead events detected per second
Region
Events/
Second
Number of bead events detected per second that are
classified in a region
Table 3. Status Bar Color Coding (Continued)
Category Color Indicates
Table 4. Status Bar
Communication Message Details
Status Bar
Color
Message Indicates
Green Idle Waiting to process the next
command.