Installation Guide Manual

• Classification control microspheres (CON1)

• Reporter control microspheres (CON2)

For xPONENT 3.1:

Calibration and Verification Kits

For both:

xMAP Sheath Fluid

Required Laboratory Reagents

The following items are necessary to run the Luminex 200 system.

They are not provided by Luminex.

• Household bleach

• 70% isopropanol or 70% ethanol

• Mild detergent

• Distilled water

Luminex Software

Luminex software provides complete control of the system and performs data analysis. The

PC accompanying your system is preloaded with the Luminex software. However, we supply

a software CD should you need to reinstall the software.

This software requires a dedicated system. Unauthorized additional software is prohibited

and may result in improper operation of the system.

Luminex

200

™

Installation Manual

In Vitro Diagnostic Use