User Manual User Manual

• Shipping and storage: The allowable shipping and storage temperature and humidity

ranges are 0°C to + 50°C and 20-80% noncondensing, respectively

• Input voltage range: 100 - 120 V~ ± 10%, 1.4 Amp, and 200-240 V~ ± 10%, 0.8 Amp,

47-63 Hz.

• AC inlet fuse: 3 Amp, 250 V~, fast acting

Optics

• Reporter laser: 532 nm, nominal output 10-15 mW, maximum 500 mW, frequency-doubled

diode; mode of operation, continuous wave (CW)

• Classification laser: 635 nm, 9.1 mW ± 6%, maximum output 25 mW, diode; mode of

operation, continuous wave (CW)

• Reporter detector: Photomultiplier tube, detection bandwidth of 565-585 nm

• Classification detector: Avalanche photo diodes with temperature compensation

• Doublet discrimination detector: Avalanche photo diodes with temperature compensation

Fluidics

• Sheath flow rate 90 µL ± 5 µL/second

• Cuvette: 200 micron square flow channel

• Sample injection rate: 1 µL/second ± 0.05 µL

• Sample uptake volume: 20-200 µL

Electronics

• Reporter channel detection: A/D resolution 14 bits

• Communications interface: USB

• Luminex XYP instrument, communications interface: RS 232

Luminex XYP Instrument General

• Ambient temperature: 15°C to 30°C (59°F to 86°F)

• Humidity: 20% to 80%, noncondensing

• Altitude: operation up to 2400 m (7874 ft) above mean sea level

• Physical dimensions: 44 cm (17.25 inches) W x 60 cm (23.5 inches) D x 8 cm (3 inches) H

• Weight: 15 kg (33 lbs.)

• UL installation category: UL Installation Category II, as defined in Annex J of UL 61010A-1

• Pollution degree: UL Pollution Degree 2, as defined in Section 3.7.3.2 of UL 61010A-1

• Heater operating range: 35°C to 55°C (95°F to 131°F) with tolerance 0°C to +2°C

• Input voltage range: 100-240 V~ ± 10%, 1.8 Amps, 47-63 Hz

• AC inlet fuse: 3 A, 250 V~, fast acting

For In Vitro Diagnostic Use

The System