User Manual Addendum Version 1.7 Instruction Manual

Luminex 100 User Manual Version 1.7 Addendum xMAP Technology
2 PN 89-00002-00-143 Rev. B
Safety and
Regulatory Symbols
New safety and regulatory symbols have been added to the Luminex
100 system and manuals. Please become familiar with these symbols.
These symbols describe warnings, cautions, and general information
used in the operation of this instrument.
Calibrators Vortex the xMAP calibrator containers to ensure homogeneity. Do
not dilute xMAP calibrator reagents. Note that position of the vial
may affect drop size. Be sure to invert the vial such that it is
perpendicular to the plate surface. When calibrating the analyzer,
load a microtiter plate with at least five drops of each: CAL1 in well
A1, CAL2 in well B1 and distilled water in well E1 through H1 to
Wash a total of four times. You can use different wells as necessary.
To select different well locations in the software, select Options
from the Tools menu. In the Options window, select the Setup XY
tab, then click on the drop-down arrow next to the entry cell for the
calibrator, then click on the well location.
Symbol Description Symbol Description Symbol Description
Alternating current
(ac)
Warning
(refer to manual)
Warning
(refer to manual)
Protective ground
Warning
(refer to manual)
Warning
(refer to manual)
On
Warning
(refer to manual)
Warning (refer to
manual)
Off
Catalog Number Consult instructions
for use
WEEE - Do not throw
in trash
Batch Code Serial Number
Temperature
Limitation
Expiration Date Date of Manufacture
Manufacturer
Underwriter’s
Laboratory
Canadian
Underwriter’s
Laboratory
European Union
Conformity
US