User Manual, Version 2.3

xMAP Technology Using Luminex 100 IS 2.3 Software
PN 89-00002-00-071 Rev. C 5 - 17
collected events. Post acquisition does not display decaying dot plot;
it’s only a real-time function.
Status Bar The Status Bar displays information about the Command State,
Device Status, Device Activity, Laser Status, Total Events per
Second, and Region Events per Second. Color coding indicates the
urgency of each item’s status. Device Activity uses no color coding.
Figure 5-15. System Status Bar
Table 5-3 describes the types of status bar messages in relation to the
message color coding.
Table 5-3. Status Bar Color Coding
Category Color Indicates
Command
State
Indicates communication status of the Luminex analyzer or
operations being processed
Green Idle or processing
Yellow Connecting, pausing, or paused
Red Disconnected or locked out
Device Status Indicates the current process of or warning about the
Luminex analyzer
Green Running or standby
Yellow Busy, pressurizing, sheath is empty, or warming
up
Red Not ready or disconnected
Device
Activity
Indicates the activity that the Luminex analyzer is
performing. Note: The device activity has no color code.