User Manual, Version 2.3

PN 89-00002-00-071 Rev. C 2 - 1

Safety

Symbols Please become familiar with the information in this chapter before

using the equipment. Do not perform procedures on your Luminex

100 IS 2.3 system that are not specifically contained in this manual,

unless you are directed to do so by Luminex Technical Support.

These symbols describe warnings, cautions, and general information

used in the operation of this instrument. These symbols are further

defined under “Safety Precautions.”

Number Symbol Description Number Symbol Description

1 Alternating current (ac) 7 Warning (refer to manual)

2 Protective ground 8 Warning (refer to manual)

3 On 9 Warning (refer to manual)

4 Off 10 Warning (refer to manual)

5 SN Serial number 11 Warning (refer to manual)

6 Warning (refer to manual)