User Manual, Version 2.1
Index-8 PN 89-00002-00-061 Rev. A
Luminex 100 IS User Manual Version 2.1 xMAP Technology
select the product
calibration trend report
6-7
self diagnostics
run self diagnostics
7-30
self-diagnostic tests 4-11, 4-12
sensitivity 3-1
sensitivity, specifications 5-4
session
paste to
7-66
session results 7-60
analysis 7-60
set 7-16
set up a patient list 7-46
set up multiple session run 7-43
setup 4-3
sheath 3-1
manually monitor 8-9
sheath and waste fluids, manually monitor
waste
8-9
sheath filter 5-12
maintenance 8-8
product number 10-2
sheath flow rate 5-5
sheath fluid 7-53
container, product number 10-2
fill 8-9
product number 10-3
sheath fluid container 5-12
sheath fluid is leaking onto the plate carrier 9-9
sheath fluid levels 8-1
sheath fluid, reservoir with 70% isopropanol 9-2
sheath pressure lower limit exceeded 9-5
sheath pressure upper limit exceeded 9-5
shield 4-7
installation 4-7
removing 4-7
warning 5-10
shut-down procedure 8-2
software 4-11, 5-3, 7-68, 10-3
exit 7-71
initialize 4-12
software installation
how to
9-11
software overview
Luminex 100 IS software
3-2
software specifications 5-3
dedicated system 5-3
software, main menu 7-3
soluble analytes 3-1
specification
classification laser
5-5
specifications 5-5
5-5
accuracy and precision 5-3
capacity 5-4
electronics 5-5
fluidics 5-5
general XYP instrument 5-5
hardware 5-2
Luminex 100 instrument 5-5
Luminex 100 instrument optics 5-5
Luminex 100 IS
bath sonicator 5-7
Luminex 100 IS performance 5-3
reporter laser 5-5
sensitivity 5-4
speed 5-3
specifications, vortex 5-7
specified volume 7-53
speed
specifications
5-3
stability 3-2
start a plate
begins acquisition
7-53
start plate, begin processing 7-48
startup 4-11
start-up procedure 8-1
Status bar 7-6
status bar 7-3
Status communication 7-8
Status communication, messages 7-8
status of instrument 2-7
subsystems 5-7
successful acquisition 7-53
successful initialization 4-11
support 1-2, 9-1
surge suppressor protector
UPS
4-11
symbols 2-1
syringe 3-1, 5-11
syringe cylinder
product number
10-2
syringe seal
maintenance
8-6