User Manual, Version 2.1

PN 89-00002-00-061 Rev. A Index-7
xMAP Technology Index
R
radiation exposure 2-5
rate 3-1
reaction 3-1
reagent specifications 5-2
reagents 5-3, 10-3
specifications 5-2
recommended additional equipment
bath sonicator
5-7
refill sheath container 8-9
refill sheath warning 8-9
release system pressure 8-9
remove air bubbles 7-21
remove shield 4-10
remove the probe 4-6
removing
shield
4-7
replace 8-2
fuses 8-10
replace filter
air intake
8-3
replace syringe plunger 8-6
reporter 3-1
reporter channel 5-5
reporter laser 3-1
reporter laser, specifications 5-5
reports 3-3
reservoir 7-3
reservoir, use 4-8
responsibility 2-8
restore database 7-65
restore the database
reload database previously saved
7-65
results
reports
3-2
resume acquisition 7-55
Resume button 7-48
resume button, acquisition process 7-49
retract 4-8
retract button 4-8
plate holder 4-8
retract the plate holder 4-8
return 2-8
return shipment 2-8
robotics
theory
5-1
routine maintenance 2-4
run author 7-46
run multi-batch button 7-43
run name 7-46
run samples
daily
8-1
releasing pressure 8-2
sheath container cap 8-1
verify 8-1
running samples
after
8-1
before 8-1
S
safety advisories 2-2
safety information 4-1
safety precautions 2-1, 2-2
Sample Arm 5-9
description 5-10
vertical height adjust 8-11
Sample Arm vertical height 8-11
sample data
entering
3-2
sample details 3-3
sample empty detected 9-9
sample error messages 9-6
sample high/low 9-8
Sample Probe 4-5, 4-6, 5-10
needle adjust 4-10
Sample Probe down button 7-30
sample timed out 9-8
sample tube holder
product number
10-2
sanitize 8-1, 9-2
decontaminate 7-22
remove air bubbles 7-22
with 70% isopropanol 7-22
sanitize button 7-21
sanitize the system
decontaminate sample lines
7-21
sanitize with 70% isopropanol 8-2
scan in new samples 7-49
SD system
alarms
A-5
installation A-2
troubleshooting A-6
select
product
6-5, 6-6