Manual

Luminex 100 IS User Manual Version 2.3 xMAP Technology
5 - 18 PN 89-00002-00-072 Rev. C
The Status Bar displays status information as the software processes
commands. Table 5-4 shows the typical messages that appear in the
status bar. Additionally, information displays as text on the
Diagnostics tab.
• Idling: waiting for a command
• Aspirating: drawing in sample
• Collecting Data: collecting data
• Sanitizing: sanitizing the instrument
• Washing: washing the sample line
• Priming: priming the instrument
• Calibrating: calibrating the instrument
• Canceling: canceling a command
• Backflushing: backflushing the instrument
• Draining: draining the instrument
• Warming Up: warming up the instrument
• Verifying: verifying calibration
• Soaking: soaking the probe
• Adjusting sample probe
• Self Diagnosing: performing self-diagnostic
routine
Laser Status Laser temperature and readiness status
Green Lasers warmed up
Yellow Warmup timer countdown in seconds from
1800
Red Lasers off
Total Events/
Second
Number of total bead events detected per second
Region
Events/Second
Number of bead events detected per second that are
classified in a region
Table 5-3. Status Bar Color Coding (Continued)
Category Color Indicates