Manual

Index-10 PN 89-00002-00-069 Rev. A
Luminex 100 IS User Manual Version 2.2 xMAP Technology
SD Formula 6-48
select
product
5-6, 5-7
select the product
calibration trend report
5-7
self diagnostics
run self diagnostics
6-39
Self diagnostics command 6-32
self diagnostics, running 6-33
self-diagnostics, view details 6-33
sensitivity 4-1
sensitivity, specifications 3-4
session
pasting to
6-73
set well locations 6-34
set XYP heater temperature 6-21
setting 6-22
setting gates 6-48
setting up multiple session run 6-61
setup A-4
sheath 4-1
sheath and waste fluids, manually monitor
waste
7-2
sheath filter 3-12
illustration 7-10
maintenance 7-10
product number 9-2
sheath flow rate 3-5
sheath fluid 6-84
container, product number 9-2
filling 7-2
product number 9-3
sheath fluid container 3-13
sheath fluid leaking 8-10
sheath fluid levels 7-1
sheath fluid, reservoir with 70% isopropanol 8-2
sheath pressure limit exceeded 8-6
sheath pressure lower limit exceeded 8-6
Show Bead 6-49
show bead field 6-49
Shut Down the Instrument 6-121
shut-down procedure 7-2
Single Step 6-10
Single step 6-10
Soak command 6-31
software 3-3, 6-119, 9-3
software overview
Luminex 100 IS software
4-2
software specifications 3-3
dedicated system 3-3
soluble analytes 4-1
sorting methods 6-99
sorting, sample progress 6-98
specification
classification laser
3-5
specification, Luminex XYP 3-6
specifications 3-5
3-5
accuracy/precision 3-4
capacity 3-4
electronics 3-5
fluidics 3-5
general XYP 3-5
hardware 3-2
Luminex 100 IS 3-3, 3-5
bath sonicator 3-7
reporter laser 3-5
sensitivity 3-4
speed 3-3
specifications, Luminex 100 analyzer 3-5
specifications, Luminex SD C-1
specifications, PC 3-6
specifications, vortex 3-7
specified volume 6-84
speed specifications 3-3
stability 4-2
Standards and Controls, invalidate 6-93
Standards and Controls, validate 6-93
Standards Tab 6-91
Standards tab 6-87
standby 6-13
Start 6-19, 6-47
Start Plate command 6-84
starting a plate
begins acquisition
6-84
start-up procedure 7-1
Statistics 6-47
status bar 6-3, 6-13
main screen 6-11
status communication 6-13
status of instrument 2-8
Std. Deviation 6-48
storage, raw data 6-5
subsystems 3-8