Manual

Index-6 PN 89-00002-00-069 Rev. A
Luminex 100 IS User Manual Version 2.2 xMAP Technology
instrument status 2-8
insufficient bead count 8-7
integrity 4-2
intended use, general system 1-1
intended use, Luminex SD C-1
interrupts acquisition 6-85
invalidate 6-93
Invalidate button 6-94
invalidate or validate Standards and Controls 6-
93
IS software exit 6-122
K
kit manufacturer 4-2, 6-54
L
label 2-3, 2-7
label type specifications 3-7
labels 2-2, 2-7
laboratory reagents 3-3
laboratory testing 1-1
laser 4-1
analyzer 2-6
apertures 2-6
location 2-6
laser apertures 2-7
laser information 2-5
laser radiation 2-7
laser warnings 2-6
laser, bar code reader 2-7
leaking sheath fluid 8-10
leaks 2-5
learning about the device
customer support
6-119
help menu 6-119
light
protect from
4-2
light emission 2-8
Load a Batch 6-60
load a multi-batch 6-64
Load patient list 6-63
location 2-7, 2-8
locked out 6-13
system error 8-7
Log/Linear 6-49
lot and date dialog box
illustration
5-7
Lot management 6-75
Lots
Export calibration or control
6-38
import calibration or control 6-37
Revert to Existing Lots 6-37
reverting to existing lots 6-37
low laser power 8-6
low voltage 8-6
lower and raise Sample Probe 6-39
Luminex 100
maintenance and cleaning
7-1
Luminex 100 analyzer
maintenance functions
A-11
Luminex 100 analyzer problems 8-10
Luminex 100 IS 4-1, 7-1
general laboratory use 1-1
specifications 3-7
Luminex 100 IS analyzer and XYP 2-3, 2-4
Luminex 100 IS software 1-1
Luminex 100 IS system
components
3-2
Luminex Corporation, contact information 1-2
Luminex SD system, includes C-2
Luminex SD, alarms C-5
Luminex SD, installation C-3
Luminex SD, intended use C-1
Luminex SD, maintenance and cleaning C-5
Luminex SD, specifications C-1
Luminex SD, troubleshooting C-6
Luminex SD, using C-5
Luminex session setup wizard
illustration
6-82
Luminex xMAP microspheres 4-2
Luminex xMAP technology 4-1
Luminex XYP problems 8-11
Luminex XYP specifications 3-6
M
main screen 6-4
illustration 6-3
main screen tabs 6-14
maintenance 7-1
maintaining and cleaning 7-1
Maintenance commands 6-24
maintenance functions A-11
maintenance panel button 8-2
Maintenance Report 6-108