Datasheet

Lumimicro 5050 ? Three Chip Specification
Max 120 ~ 150¡C
Max 240¡C
120sec.Max
10sec.Max
Time
Temp.
(¡C)
Max 150 ~ 170¡C
Max 260¡C
90 ~120sec.Max
10sec.Max
Time
Temp.
(¡C)
◆ Soldering Condition
1. Reflow Conditions ( With Pb )
Preliminary heating to be at 150¡C max. for 2 minutes max.
Soldering heat to be at 240¡C max. for 10 seconds max.
Recommended Solder Paste : Alloy- 63Sn/37Pb Model: OL107B,
2. Pb free Reflow Conditions
Preliminary heating to be at 170¡C max. for 2 minutes max.
Soldering heat to be at 260¡C max. for 10 seconds max.
Recommended Pb free Paste Alloy: 96.5Sn/3Ag/0.5Cu. - Model: OL204
3. For Manual Soldering
Not more than 5seconds @MAX300¡C, under soldering iron.
- 19 - www.lumimicro.com