User Manual

ManualsBrandslumiman ManualslightLUMIMAN Sunrise Smart Wake Up Light

Set fall asleep

sound volume

Use or to select volume (V01 to V15 for

selection, default is V10). Press to confirm and the

brightness indication flashes.

Set fall asleep

light

brightness

Use or to select brightness (L1 to L30 for

selection, default is L10). Press to confirm and the

duration time indication flashes.

Set fall asleep

duration time

Use or to select duration time (15/30/ 60

MIN for selection, default is 15 MIN). Press to

confirm setting and activate the fall asleep.

Sunset

simulation

Sunset simulation for peaceful bedtime: When the fall

asleep is activated, the light will dim until it goes off and

the sound will gradually decrease until there is no

sound.

Stop/deactivat

e fall asleep

Press and hold to stop/deactivate fall asleep.

During fall

asleep is

working

4. Press or to adjust the brightness. Light

dimming will start from the selected brightness level.

5. Press or to adjust the volume. Sound

decreasing will start from the selected sound level.

6. Press or to adjust the radio channel when

radio is selected as the fall asleep sound. The selected

radio channel will be played and decrease sound

gradually until there is no sound.

4. BEDSIDE LIGHT

Purpose

Action / Findings

White light

1. Press to turn on/off white light.

2. Press

or to adjust the brightness (L1 to

L30 levels, default is L10).

Color Light

1. Press to turn on/off color light, when turn on,

it will be auto color-change mode.

2. Press or to adjust the light color (6 colors

for selection). Green-Red-Blue-Purple-Orange-Aqua.

3. Press and hold or to adjust the color

light brightness (L1 to L30 levels, default is L30).

5.RADIO

To get a good radio signal, fully unwind antenna and move it around

until you get good reception.

Purpose

Action / Findings

Turn on/off

Press . The radio icon will illuminate on the

display when radio is turned on.

Stop alarm

1. When the alarm goes off, press any button except

to stop the alarm.

2. When the alarm goes off, the alarm will stop

automatically in 5 minutes.

3. During the wake-up light is increasing brightness,

press and hold to turn off the light. The alarm

sound will still play at alarm time when your alarm

mode include sound.

Note: The above operations don’t deactivate the

alarm, the alarm will normally work in the next day.

3.FALL ASLEEP

Purpose

Action / Findings

Start

Press to start fall asleep setting. The fall asleep icon

will illuminate on the display and the mode

indication flashes.

Set fall asleep

mode

Use or to select mode (F1 to F3 for

selection, F1=Light + Sound; F2=Light; F3=Sound).

Press to confirm and the sound indication flashes.

Set fall asleep

sound

Use or to select sound (S-1 to S-8, xx MHZ

for selection). Press to confirm and the volume

indication flashes

SMART WAKE UP LIGHT

WiFi Version

User Manual

Thank you for choosing our product.

Please read this manual carefully before using it.

1. OVERVIEW

OVERVIEW

 Please keep this manual for future reference.

 This product is for indoor use only.

 Do not press two or more buttons at the same time.

 Do not use this product near water or in a damp place.

 Unplug the device during a light storm or when unused for a long

period of time to prevent damage to the product.

 Do not attempt to disassemble the device.

 Make sure you are using the correct power supply: plug the device

into the outlet with the appropriate power supply as described in

the manual.

 Do not drip or splash water on the device.

 Do not place the liquid container on top of the device.

When unpacking, ensure the following elements are included:

1ⅹ Wake Up Light

1ⅹ USB cable

1ⅹ Power Adapter

1ⅹ User Manual

SPECIFICATION

UNPACKING YOUR PACKAGE

CAUTION

• AC/DC Adaptor Input: 100-240V ~ 50/60Hz 0.5A

• Output: 5V 2A

• Output for phone charging: 5V 1A

• Power Consumption: 10W

• FM Frequency band: 87.5 - 108MHz

1. Connect the USB cable to the power adapter and the Wake Up Light.

2. Plug the power adapter to the power socket.

3. Insert 3xAAA batteries to the battery compartment to be used as a

back-up power source to record your setting and time. (batteries are

not included in the package)

Note: The Wake Up Light can not be operated when no connection

with DC 5V 2A power

1. CLOCK

Once the Smart Wake Up Light is connected to power, the hour flashes.

Purpose

Action / Findings

Set time

Use or to set time and press to

confirm and continue ;

display , use or select network

SET UP

BUTTON CONTROL

timing or not and

press to conﬁrm.

Resume the time

setting

Press and hold until the hour flashes and

repeat setting as above.

Switch 12/24H

Press .

Set display

brightness

Press to set display brightness: low, high or

off. Default is high.

Press and hold , brightness mode change ( on

for auto sensing mode, off for manual adjustment

mode)

2. ALARM

Allow user to program 2 alarms based on individual needs. For

example, set Alarm 1 for working days and Alarm 2 for weekend. The

setting of the 2 alarms is same.

Purpose

Action / Findings

Activate or

deactivate alarm

Press / . When the alarm is activated, the alarm

icon

/ will illuminate on the display and the alarm

time will be shown shortly.

Set alarm time

Press and hold / until the hour indication

flashes. Use

or to set alarm time. Press

/ to confirm and the mode indication flashes.

Set alarm mode

Use or to select mode (F1 to F3 for

selection, F1=Light + Sound; F2 Light; F3=Sound).

Press

/ to confirm and the sound indication

flashes.

Set alarm sound

Use or to select sound (S-1 to S-8, xx MHZ

for selection). Press / to confirm and the

volume indication flashes.

Set alarm sound

volume

Use or to select volume (V01 to V15 for

selection, default is V10). Press / to confirm

and the light brightness indication flashes.

Set wake-up

light brightness

Use or to select light brightness (L1 to L30

for selection, default is L10). Press / to confirm

and the duration time indication flashes.

wake-up light

duration time

30 MIN

Sunrise

simulation

The wake-up light can simulate sunrise to gradually

increase the brightness 30min before the alarm

time and reaches the set brightness at alarm time.

Snooze

When the alarm goes off, press to snooze.

After 5 minutes, the alarm sound will ring and/or light

will automatically come on.

Summary of content (2 pages)

PAGE 1
. OVERVIEW SMART WAKE UP LIGHT OVERVIEW CAUTION WiFi Version  Please keep this manual for future reference.  This product is for indoor use only.  Do not press two or more buttons at the same time.  Do not use this product near water or in a damp place.  Unplug the device during a light storm or when unused for a long period of time to prevent damage to the product.  Do not attempt to disassemble the device.
PAGE 2
Press and hold Auto scan FM tuning until frequency flashes to start searching for active channels. Once the channels are Once your alarm clock is connected with the power, press and hold located, they will be saved as P01,P02, up to P40. button 1. Press blinking. This is in pairing mode. or to adjust the Press or or for 5 seconds until the icon on the device rapidly Choose “Add Device” in the center of the page and choose the type frequency(0.1MHZ). 2. Press and hold FM volume 2.