Datasheet

General Information

Part Number Nomenclature

LUXEON Mid-Power Illumination emitters are tested and binned at 100mA, with current pulse duration of 20ms.

All characteristic charts where the thermal pad is kept at constant temperature (25°C typically) are measured with

current pulse duration of 20ms. Under these conditions, junction temperature and thermal pad temperature are

the same.

The part number designations for the MXCA series is explained as follows:

M X C A - B C D E - I J K L

Where:

A — designates minimum CRI performance (value 7 = 70 minimum and 8 = 80 minimum)

B — designates radiation pattern (value P = Lambertian)

C — designates color (value W = White)

D, E — designates nominal ANSI CCT (for example, 30 = 3000K and 40 = 4000K)

I, J, K & L — additional part number designation

Therefore products in this series with minimum CRI value of 80, CCT of 4000K will have the part numbering scheme:

M X C 8 - P W 4 0 - 0 0 0 0

Average Lumen Maintenance Characteristics

Lumen maintenance for solid-state lighting devices (LEDs) is typically dened in terms of the percentage of initial

light output remaining after a specied period of time. LM-80 test reports are available upon request.

Environmental Compliance

Lumileds is committed to providing environmentally friendly products to the solid-state lighting market. LUXEON

Mid-Power LEDs are compliant to the European Union directives on the restriction of hazardous substances in

electronic equipment, namely REACH and the RoHS directive. Lumileds will not intentionally add the following

restricted materials to these LEDs: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB)

or polybrominated diphenyl ethers (PBDE).