Datasheet

DS203 LUXEON 3535L Product Datasheet 20150312 ©2015 Lumileds Holding B.V. All rights reserved. 15
Product Binning and Labeling
Purpose of Product Binning
In the manufacturing of semiconductor products, there is a variation of performance around the average values given
in the technical data sheets. For this reason, Lumileds bins the LED components for luminous ux, color and forward
voltage (V
f
).
Decoding Product Bin Labeling
LUXEON 3535L LEDs are labeled using a four digit alphanumeric code (CAT code) depicting the bin values for
emitters packaged on a single reel. All emitters packaged within a reel are of the same 3-variable bin combination.
Using these codes, it is possible to determine optimum mixing and matching of products for consistency in a given
application.
Reels of 2700K, 3000K, 3500K, 4000K, 5000K, 5700K, 6500K emitters are labeled with a four digit alphanumeric
CAT code following the format below.
A B C D or A x B C D
Where:
A = Flux bin (L etc.)
x = PLL internal use
B and C = Color bin (For example 51, 52, 53, 54, 55, 56)
D = V
f
bin
Luminous Flux Bins
Table 7 and Table 8 list the standard photometric luminous ux bins for LUXEON 3535L LEDs (tested and binned
at 100mA). Although several bins are outlined, product availability in a particular bin varies by production run and
by product performance. Not all bins are available in all colors. Please contact your Lumileds representative for the
MXA9-PW27 ux bins.
Table 7. Flux Bins
Bin Code
Minimum Photometric Flux
(lm)
Maximum Photometric Flux
(lm)
J 24 28
K 28 32
L 32 36
M 36 40
P 40 44
Q 44 48
R 48 52
S 52 56
Tested and binned at 25°C, I
f
=100mA. Tester tolerance: ±7.5%.