Datasheet

DS203 LUXEON 3535L Product Datasheet 20150312 ©2015 Lumileds Holding B.V. All rights reserved. 5
Electrical Characteristics
Electrical Characteristics of LUXEON 3535L LEDs
Solder Pad Temperature = 25°C, Test Current = 100mA
Table 3.
Part
Numbers
Forward Voltage V
f
[1]
(V)
Typ. Temperature Coecient
of Forward Voltage
[2]
(mV/°C)
DV
f
/ DT
J
Typical Thermal Resistance
Junction to Solder Pad (°C/W)
Ru
J-C
Minimum Typical Maximum
MXAx-PWxx-H001 2.7 2.90 3.2 -2.0 to -4.0 18
MXAx-PWxx-S001 2.8 3.00 3.4 -2.0 to -4.0 22
MXAx-PWxx-0000 2.8 3.05 3.4 -2.0 to -4.0 18
Notes for Table 3:
1. Lumileds maintains a tolerance of ± 0.10V on forward voltage measurements.
2. Measured between T
j
= 25°C and T
j
= 110°C.
Absolute Maximum Ratings
Table 4.
Parameter Maximum Performance
DC Forward Current (mA)
[1] [3]
MXAx-PWxx-S001 and MXAx-PWxx-0000: 200
MXAx-PWxx-H001: 300
Peak Pulsed Forward Current (mA)
[2] [3]
MXAx-PWxx-S001 and MXAx-PWxx-0000: 240
MXAx-PWxx-H001: 350
ESD Sensitivity
Class 3A Human Body Model
Class C Machine Model
LED Junction Temperature
[3]
125°C
Operating Case Temperature at 100mA -40°C - 105°C
Storage Temperature -40°C - 105°C
Soldering Temperature JEDEC 020D 260°C
Allowable Reow Cycles 3
Reverse Voltage (Vr)
[4], [5]
-5V
Notes for Table 4:
1. Ripple current with a frequency of 50-150Hz is allowed, as long as the average of the current waveform is below 200mA, and the maximum of the current waveform is lower than 240mA.
2. At 10% duty cycle and pulse width 10ms.
3. Proper current derating must be observed to maintain junction temperature below the maximum.
4. LUXEON 3535L LEDs are not designed to be driven in reverse bias.
5. At maximum reverse current of 10µA.
JEDEC Moisture Sensitivity
Table 5.
Level
Floor Life
Soak Requirements
Standard
Time Conditions Time Conditions
2 1 year
[ 30°C / 60% RH
168 Hrs. + 5 / -0 Hrs.
[ 85°C / 60% RH