Datasheet
DS105 LUXEON Z Colors Product Datasheet 20150130 ©2015 Lumileds Holding B.V. All rights reserved. 7
Absolute Maximum Ratings
Table 5.
Parameter
Green/Cyan/
Blue/Royal Blue
Cold-Tested Red/
Deep-Red/Red-
Orange/Amber
Hot-Tested Red/Red-
Orange/Amber
[2]
PC Amber/Lime
DC Forward Current (mA) 1000 700 1000/700 700
Peak Pulsed Forward Current (mA) 1000 700 1000/700 700
ESD Sensitivity JESD22-A114-B
LED Junction Temperature
[1]
150°C 135°C 120°C/135°C 135°C
Operating Case Temperature at 500mA -40°C - 135°C -40°C - 120°C -40°C - 120°C -40°C - 110°C
Storage Temperature -40°C - 135°C -40°C - 135°C -40°C - 120°C -40°C - 135°C
Soldering Temperature JEDEC 020c 260°C JEDEC 020c 260°C JEDEC 020c 260°C JEDEC 020c 260°C
Allowable Reow Cycles 3 3 3 3
Autoclave Conditions 121°C at 2 ATM 100% Relative Humidity for 96 Hours Maximum
Reverse Voltage (V
r
) LUXEON Z Color Portfolio LEDs are not designed to be driven in reverse bias.
Notes for Table 5:
1. Proper current derating must be observed to maintain junction temperature below the maximum.
2. Hot Tested LUXEON Z Red (LXZ1-PD02), Red-Orange (LXZ1-PH02) and Amber (LXZ1-PL03) products have two boundary points for maximum conditions:
I
f
= 1A & T
j
= 120°C or I
f
= 700mA & T
j
= 135°C.
JEDEC Moisture Sensitivity
Table 6.
Level
Floor Life
Soak Requirements
Standard
Time Conditions Time Conditions
1 unlimited
[ 30°C / 85% RH
168 Hrs. + 5 / -0 Hrs. 85°C / 85% RH