Datasheet

DS105 LUXEON Z Colors Product Datasheet 20150130 ©2015 Lumileds Holding B.V. All rights reserved. 2
General Information
Part Number Nomenclature
LUXEON Z Color emitters are tested and binned at 25°C or 85°C, 500mA, depending on the product.
The part number designation for LUXEON Z Color LEDs is explained as follows:
L X Z 1 - A B C D - E F G H
Where:
A — designates radiation pattern (value P for lambertian)
B — designates color (see LUXEON Z color binning and labeling section)
C — designates color variant (0 for color variants)
D — designates color version (1, 2, etc.)
E — open slot to accommodate additional requirements per product and part number
FGH — (optional) minimum luminous ux (lm) or radiometric power (mW) performance
Please see DS120 for LUXEON Z White part number designation.