Datasheet

DS120 LUXEON Z Product Datasheet 20150217 ©2015 Lumileds Holding B.V. All rights reserved. 3
Product Selection
Product Selection for LUXEON Z Emitters
Junction Temperature = 85°C
Table 1. LUXEON Z
Part
Number
Nominal
CCT
Min
CRI
500mA 700mA 1A
Min.
Flux
(lm)
Typical
Flux (lm)
Typical Vf
(V)
Typical
Ecacy
(lm/W)
Typical
Flux (lm)
Typical Vf
(V)
Typical
Ecacy
(lm/W)
Typical
Flux (lm)
Typical Vf
(V)
Typical
Ecacy
(lm/W)
LXZ1-2780-y 2700K 80 100 115 2.80 82 147 2.85 74 191 2.89 66
LXZ1-3080-y 3000K 80 110 124 2.80 89 159 2.85 80 206 2.89 71
LXZ1-3580-y 3500K 80 110 124 2.80 89 159 2.85 80 206 2.89 71
LXZ1-4080-y 4000K 80 120 130 2.80 93 166 2.85 83 216 2.89 75
LXZ1-4070 4000K 70 120 134 2.80 96 172 2.85 86 223 2.89 77
LXZ1-5070 5000K 70 130 148 2.80 106 189 2.85 95 246 2.89 85
LXZ1-5770 5700K 70 140 152 2.80 109 195 2.85 98 253 2.89 88
LXZ1-6565 6500K 65 140 154 2.80 110 197 2.85 99 256 2.89 89
Notes for Table 1:
1. All LUXEON Z emitters above are tested and binned at 500mA/85°C.
2. Lumileds maintains a tolerance of ±6.5% on luminous ux and ±2 on CRI measurements.
3. In the part number the -y is the designation for the color requirement. On 80 CRI versions -3 designates 3 SDCM and -5 designates 5 SDCM. 70CRI parts or lower will not have a SDCM
designation and all parts are binned within a 5 step SDCM.
Optical Characteristics
LUXEON Z at Test Current 500mA, Junction Temperature 85°C
Table 2.
Nominal ANSI
CCT
Color Temperature
CCT Typical
Typical Total Included
Angle
1
(degrees) u
0.90V
Typical Viewing
Angle
2
(degrees)
2u 1/2
2200K 2230K 160 120
2700K 2725K 160 120
3000K 3045K 160 120
3500K 3465K 160 120
4000K 3985K 160 120
5000K 5028K 160 120
5700K 5665K 160 120
6500K 6250K 160 120
Notes for Table 2:
1. Total angle at which 90% of total luminous ux is captured.
2. Viewing angle is the o axis angle from lamp centerline where the luminous intensity is ½ of the peak value.