Datasheet

DS103 LUXEON M Product Datasheet 20150205 ©2015 Lumileds Holding B.V. All rights reserved. 21
Product Binning and Labeling
Purpose of Product Binning
In the manufacturing of semiconductor products, there is a variation of performance around the average values given
in the technical data sheets. For this reason, Lumileds bins the LED components for luminous ux, color, and forward
voltage (V
f
).
Decoding Product Bin Labeling
Reels with LUXEON M White emitters are labeled with a four digit alphanumeric code (CAT code) following the
format below. All emitters packaged within a reel are of the same 4-variable bin combination.
For LXRx-xWxx, Reels of emitters are labeled with a four digit alphanumeric CAT code following the format below.
ABCD
A = Luminous ux bin (See table 9)
B = Color or CCT indication (1 for 6500K, 2 for 5700K, 3 for 5000K, 5 for 4000K, 6 for 3500K, 7 for 3000K,
and 8 for 2700K)
C = Color consistency (5 for within 5-step MacAdam Ellipse, 3 for within 3-step MacAdam Ellipse). Detailed
denitions for these color bins can be found in Table 15.
D = V
f
bin (F,G,H)
Reels with LUXEON M Royal Blue emitters are labeled with a three digit alphanumeric CAT code following the format
below. All emitters packaged within a reel are of the same 4-variable bin combination.
ABC
A = Radiometric Power Bin (See table 10)
B = Peak wavelength bin (See table 12)
C = V
f
bin (F,G,H)