Datasheet

DS061 LUXEON Rebel ES Product Datasheet 20140728 ©2015 Lumileds Holding B.V. All rights reserved. 2
General Information
Product Nomenclature
LUXEON Rebel ES is tested and binned at 700mA, with current pulse duration of 20 ms. All characteristic charts
where the thermal pad is kept at constant temperature (25°C typically) are measured with current pulse duration of
20 ms. Under these conditions, junction temperature and thermal pad temperature are the same.
The LUXEON Rebel ES family of emitters contain a series of LEDs designed for Illumination applications.
The part number designation for the LXML series is explained as follows:
L X M L - A B C D
Where:
A — designates radiation pattern (value P for Lambertian)
B — designates color (W for White)
C — designates color variant (C for Cool-White, N for Neutral-White)
D — designates test current (value 2 for 700mA)
The part number designation for the LXW8 series is explained as follows:
L X W A - B C D E
Where:
A — designates minimum CRI performance (value 8 = 80 minimum and 9 = 90 minimum)
B — designates radiation pattern (value P for Lambertian)
C — designates color (value W = White)
D & E — designates nominal ANSI CCT (value 27 = 2700K, 30 = 3000K, 35 = 3500K, 40 = 4000K and 50 = 5000K)
The part number designation for the LXH7 series is explained as follows:
L X H A - B C D E
Where:
A — designates minimum CRI performance (value 7 = 70 minimum)
B — designates radiation pattern (value P for Lambertian)
C — designates color (value W = White)
D & E — designates nominal ANSI CCT (value 40 = 4000K))
Therefore products tested and binned at 700mA follow the part numbering scheme:
L X M L - P W x 2, L X W x - P W x x and L X H 7 - P W x x