Datasheet

DS061 LUXEON Rebel ES Product Datasheet 20140728 ©2015 Lumileds Holding B.V. All rights reserved. 10
Pad Conguration
Note for Figure 2:
1. The Thermal Pad is electrically isolated from the Anode and Cathode contact pads.
Solder Pad Design
Notes for Figure 3:
1. The photograph shows the recommended LUXEON Rebel ES layout on Printed Circuit Board (PCB). This design easily achieves a thermal resistance of 7K/W.
2. Application Brief AB32 provides extensive details for this layout. Printed Circuit Board layout les (.dwg) are available at www.lumileds.com.
3
12
TOP
3
21
BOTTOM
3
THERMAL
2
ANODE
1
CATHODE
PA D
FUNCTION
Figure 2. Pad conguration.
Figure 3. Solder pad layout.